Items where Subject is "QT physiology > physics.mathematics.engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | E | F | G | H | J | K | L | M | N | P | R | S | T | Y | Z
Number of items at this level: 57.

A

Aabadiaan, M.R. and Alimoradi, F. and Fakhkhar, A. and Kheradmand, A.B. and Langari, A. and Kharaji, M.G. (2012) Mechanical characteristics of tire/clay modified epoxy used in fabrication of medical prostheses and artificial human parts. World Applied Sciences Journal, 20 (2). pp. 253-258.

Abazari, S. and Heidari, M. and Abjadi, N.R. (2014) Adaptive control design for a synchronous generator. Revue Roumaine des Sciences Techniques Serie Electrotechnique et Energetique, 59 (4). pp. 411-421.

Afkhami-Ardakani, M. and Shirband, A. and Golzade, J. and Asadi-Samani, M. and Latifi, E. and Kheylapour, M. and Jafari, N. (2013) The effect of iron oxide nanoparticles on liver enzymes (ALT, AST and ALP), thyroid hormones (T3 and T4) and TSH in rats. Journal of Shahrekord Uuniversity of Medical Sciences, 14.

Akbari, a. and Naroii, sh. and Karami, s. and Shahraki, h. (2011) The effect of low-level LASER on pain improvement and function in patients affected anterior knee pain. Journal of Shahrekord Uuniversity of Medical Sciences, 13.

Alimoradi, F. and Aa, M. and Langari, A. and Kharaji, M.G. (2012) Reactive oligomer to improve the impact characteristics of structural composites used in civil and medical applications. World Applied Sciences Journal, 19 (11). pp. 1596-1601.

Amirbostaghi, G. and Khatibi, S. and Keivani Hafshejani, M. and Arad, A. (2012) Comparison betweenHomotopy perturbation and modified Adomian decomposition methods in simulating the effect of Van der Waals attraction in Nano structures instability. World Applied Sciences Journal, 18 (12). pp. 1813-1824.

Arbabi, M. and Hemati, S. and Shamsizadeh, Z. and Arbabi, A. (2017) Nitrate removal from aqueous solution by almond shells activated with magnetic nanoparticles. Desalination and Water Treatment, 80. pp. 344-351.

B

Bakhshandeh, M. and Arbabi, A. and Mokhtari-Dizaji, M. and Masoumi, H. (2004) The Ability of Ultrasonic Characterization to Extract the Dose Distribution of MAGIC-f Polymer Gel. Journal of Kerman University of Medical Sciences, 22 (4).

Bakhshandeh, M. and Arbabi, A. and Mokhtari-Dizaji, M. and Masoumi, H. (2016) Determine the Dose Distribution Using Ultrasound Parameters in MAGIC-f Polymer Gels. Dose-Response, 14 (1).

E

Ehtesham, H. and Safdari, R. and Tahmasebian, Sh. (2017) Big Data in Health: New Challenges and New Solutions in Data Management (A Lifecycle Review). Indian Journal of Science and Technology, 10 (13).

F

Fakhar, A. and Aabaadiaan, M.R. and Keivani Hafshejani, M. and Langari, A. (2012) Use of reactive oligomer to improve fracture resistance of epoxy used in medical applications and GRP pipelines. World Applied Sciences Journal, 20 (2). pp. 259-263.

Falav Jozaei, A. and Baheri, A. and Hafshejani, M.K. and Arad, A. (2012) Optimization of baffle spacingon heat transfer, pressure drop and estimated price in a shell-and-tube heat exchanger. World Applied Sciences Journal, 18 (12). pp. 1727-1736.

Farrokhabadi, A. and Koochi, A. and Abadyan, M. (2014) Modeling the instability of CNT tweezers using a continuum model. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 20 (2). pp. 291-302.

Farrokhabadi, A. and Rach, R. and Abadyan, M. (2013) Modeling the static response and pull-in instability of CNT nanotweezers under the Coulomb and van der Waals attractions. PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES, 53. pp. 137-145.

Fatehi, D. (2011) The effect of formative assessment on the radiology students’ learning of the Physics courses. Journal of Shahrekord Uuniversity of Medical Sciences, 13.

Fatehi, D. and Van der Zee, J. and Van Rhoon, G.C. (2011) Intra-patient comparison between two annular phased array applicators, Sigma-60 and Sigma-Eye: Applied RF powers and intraluminally measured temperatures. INTERNATIONAL JOURNAL OF HYPERTHERMIA, 27 (3). pp. 214-223.

Fazli, N. and Koochi, A. and Kazemi, A.S. and Abadyan, M. (2014) Influence of electrostatic force and the van der Waals attraction on the pull-in instability of the CNT-based probe-actuator. CANADIAN JOURNAL OF PHYSICS, 92 (9). pp. 1047-1057.

fatehi, D. (1999) The effect of hyperthermia on chromosomal aberrations induced by Neutron irradiation in human peripheral blood lymphocytes. Journal of Shahrekord Uuniversity of Medical Sciences, 1.

G

GH.Kharaji, M. and Alimoradi, F. and Yekrangi, A. and Langari, A. (2012) An investigation on physical response of modified adhesives used in medical applications. LIFE SCIENCE JOURNAL-ACTA ZHENGZHOU UNIVERSITY OVERSEAS EDITION, 9 (1). pp. 1025-1028.

H

Hafshejani, M. and Dadjoo, F. and Alimoradi, F. and Falavand, A. and Arad, A. (2012) Simulating The Cooling Of Medical Ct-Scanners: Part 1: Formulation. LIFE SCIENCE JOURNAL-ACTA ZHENGZHOU UNIVERSITY OVERSEAS EDITION, 9 (1). pp. 1029-1034.

Hafshejani, M. and Darasaraei, A. and Dadjoo, F. and Alimoradi, F. and Falavand, A. and Arad, A. (2012) Simulating The Cooling Of Medical Ct-Scanners: Part 2: Results. LIFE SCIENCE JOURNAL-ACTA ZHENGZHOU UNIVERSITY OVERSEAS EDITION, 9 (2). pp. 1311-1315.

Heydarnejad, M.S. and Najafi, M. and Mobini-Dehkordi, M. and Rahnama, S. (2014) An assessment of acute oral toxicity of ZnO nanoparticles on serum biochemical function of liver in mice. Journal of Shahrekord Uuniversity of Medical Sciences, 16.

J

Jafari, Y. and Mir Mohamad Sadeghi, G. and Moztarzadeh, F. and Shahbazi, S. (2016) In vitro study of a new biodegradable nanocomposite based on poly propylene fumarate as bone glue. Materials Science and Engineering: C, 69.

K

Karimipour, I. and Kanani, A. and Koochi, A. and Keivani, M. and Abadyan, M. (2015) Modeling the electromechanical behavior and instability threshold of NEMS bridge in electrolyte considering the size dependency and dispersion forces. Physica E: Low-Dimensional Systems and Nanostructures, 74. pp. 140-150.

Keivani, M. and Koochi, A. and Kanani, A. and Mardaneh, M.R. and Sedighi, H.M. and Abadyan, M. (2017) Using strain gradient elasticity in conjunction with Gurtin-Murdoch theory for modeling the coupled effects of surface and size phenomena on the instability of narrow nano-switch. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 231 (17). pp. 3277-3288.

Keivani Hafshejani, M. and Afrasiabi, M. and Langari, A. and Khazaei, M. (2013) The crosslink density of styrene butadiene rubber/nano copper oxide nanocomposites. Life Science Journal, 10 (4). pp. 3666-3669.

Keivani Hafshejani, M. and Khazaei, M. and Langari, A. (2013) Influence of the addition of nano-Silica particles as reinforcement on the tensile yield properties of Polyamide 6 polymeric matrix used in medical applications. Life Science Journal, 10 (4). pp. 3593-3596.

Keivani Hafshejani, M. and Khazaei, M. and Langari, A. (2013) Investigation of the morphological properties of medical-used natural rubber composites reinforced with nano Iron oxide nanoparticles. Life Science Journal, 10 (4). pp. 3585-3588.

Keivani Hafshejani, M. and Khazaei, M. and Langari, A. (2013) Investigation of the physical abrasion of rubber polymer reinforced with nanoparticles used in fabrication of medical devices. Life Science Journal, 10 (4). pp. 3606-3610.

Keivani Hafshejani, M. and Khazaei, M. and Langari, A. (2013) Investigation of the physical abrasion of ternary polymer reinforced with nanoparticles used in medical applications. Life Science Journal, 10 (4). pp. 3601-3605.

Keivani Hafshejani, M. and Khazaei, M. and Langari, A. (2013) Removal of m-xylene from water by impregnated activated carbon. Life Science Journal, 10 (4). pp. 3646-3649.

Kharaji, M. and Alimoradi, F. and Yekrangi, A. and Mohammadian, E. and Langari, A. (2012) Study of thermal properties of improved adhesives for medical applications. LIFE SCIENCE JOURNAL-ACTA ZHENGZHOU UNIVERSITY OVERSEAS EDITION, 9 (2). pp. 1308-1310.

Khodabakhshi, A. and Amin, M.M. and Mozaffari, M. (2011) SYNTHESIS OF MAGNETITE NANOPARTICLES AND EVALUATION OF ITS EFFICIENCY FOR ARSENIC REMOVAL FROM SIMULATED INDUSTRIAL WASTEWATER. IRANIAN JOURNAL OF ENVIRONMENTAL HEALTH SCIENCE & ENGINEERING, 8 (3). pp. 189-200.

Koochi, A. and Fazli, N. and Rach, R. and Abadyan, M. (2014) Modeling the pull-in instability of the CNT-based probe/actuator under the Coulomb force and the van der Waals attraction. LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, 11 (8). pp. 1315-1328.

L

Langari, A. and Yekrangi, A. and Soroush, R. and Fakhraei, M. and Hafshejani, M.K. (2014) Numerical study of size-dependent instability of nems considering molecular force and elastic support conditions. ARPN Journal of Engineering and Applied Sciences, 9 (3). pp. 382-387.

M

Mahony, R. and Trumpf, J. and Zamani, M. (2013) Minimum-energy filtering for attitude estimation. IEEE Transactions on Automatic Control, 58 (11).

Mokhtari, J. and Farahani, M. and Kanani, A. and Rach, R. and Keivani, M. and Abadyan, M. (2017) The size-dependent electromechanical instability of double-sided and paddle-type actuators in centrifugal and Casimir force fields. SCIENTIA IRANICA, 24 (3). pp. 1077-1090.

Moussavi, S.P. and Emamjomeh, M.M. (2014) Study of adsorption isotherms and adsorption kinetics of reactive blue 19 dye from aqueous solutions by multi -wall carbon nanotubes. Journal of Shahrekord Uuniversity of Medical Sciences, 16.

N

Najafi, M. and Solati, K. and Forouzbakhsh, F. (2000) Relationship between staff burnout and mental health in staff of nuclear energy organization, Isfahan. Journal of Shahrekord Uuniversity of Medical Sciences, 2.

P

Pourmahmoud, M. and Ashari, G.R. and Ojakeh, M. and Hafshejani, M.K. (2014) Energy analysis of a CHP fuel cell system to meet energy loads of a residential building. ARPN Journal of Engineering and Applied Sciences, 9 (2). pp. 182-187.

R

Rostamzadeh, A. and Mohammadi-Bolbanabad, H. and Fatehi, D. (2015) Effects of cell phone waves on granular cells migration of cerebellum in neonatal rat. Journal of Shahrekord Uuniversity of Medical Sciences, 17.

S

Sadeghi, M. and Sadeghi, R. and Sadeghian, S. (2006) Dynamic performance of a switched reluctance motor for propulsion systems. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on.

Saeb, M. and Fatehi, D. (2011) Thyroid exposure in brain CT-scan and skull X-ray, using different levels of mA and Kvp with and without thyroid shield. Journal of Shahrekord Uuniversity of Medical Sciences, 13.

Safdari, R. and Mokhtaran, M. and Tahmasebian, Sh. (2016) Designing and Implementation of Retina Image Drawing System and Automatic Report Generation from Retina Examinations. Acta Informatica Medica, 24 (5).

Savaloni, H. and Afzali, S.M. and Gholipour Shahraki, M. (2007) Molecular Dynamic Simulation Model for the Growth of Thin Films in The Structure Zone Model. Journal of Sciences Islamic Azad University) JSIAU (17), 63.

Seyedalipour, B. and Barimani, N. and Hoseini, S.M. (2015) Embryonic malformations following exposure to copper oxide nanoparticles in Mus musculus. Journal of Shahrekord Uuniversity of Medical Sciences, 17.

Shahbazi gahrouie, D. (2000) Investigation of relationship between MR imaging, signal intensity and contrast agent at high magnetic field strength. journal of shahrekord university of medical sciences, 2 (2).

Shokuhifard, R. and Ojakeh, M. and Langari, A. and Hafshejani, M.K. (2014) Modeling the stability of freestanding cnt probe/sensor in the vicinity of graphene layers considering casimir dispersion force. ARPN Journal of Engineering and Applied Sciences, 9 (2). pp. 140-144.

T

Tadi Beni, Y. and Abadyan, M. (2013) Size-dependent pull-in instability of torsional nano-actuator. PHYSICA SCRIPTA, 88 (5).

Tadi Beni, Y. and Abadyan, M. (2013) USE OF STRAIN GRADIENT THEORY FOR MODELING THE SIZE-DEPENDENT PULL-IN OF ROTATIONAL NANO-MIRROR IN THE PRESENCE OF MOLECULAR FORCE. INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 27 (18).

Tahmasebian, Sh. and Langarizadeh, M. and Ghazisaeidi, M. and Safdari, R. (2016) Semantic-Web Architecture for Electronic Discharge Summary Based on OWL 2.0 Standard. Acta Informatica Medica, 24 (3).

Toori, R. and Shahbazi, S. and Behnami, M. and Behnami, M. and Niyakan, M. and Shahoon, H. (2015) Antibacterial effect of morphous (poly-crystalline) and amorphous (glass) nano-bioactive glass 45S5 on Streptococcus mutans‏. Journal of Dental School, 33 (2).

Y

Yekrangi, A. and Afrasiabi, M. and Langari, A. and Hafshejani, M.K. (2014) Investigation of abrasion and morphology of rubber/nano titanium oxide nanocomposites. Journal of Engineering and Applied Sciences, 9 (4). pp. 580-585.

Z

Zahraee Salehi, T. and Khosraviyan, P. and Khanamani Falahatipour, S. and Akbari Javar, H. and Hosseinzadeh Ardakani, Y. and Rassouli, A. and Kiani, K. (2016) Preparation and evaluation of a thermosensitive liposomal hydrogel for sustained delivery of danofloxacin using mesoporous silica nanoparticles. Iranian Journal of Veterinary Medicine, 10 (4).

Zamani, M. and Trumpf, J. and Hua, M.D. and Mahony, R. and Hamel, T. (2011) Observer design on the Special Euclidean group SE. Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on.

Zamani, M. and Trumpf, J. and Mahony, R. and Member, S. (2011) Near-optimal deterministic filtering on the rotation group. IEEE Transactions on Automatic Control, 56 (6).

Zamani Dehkordi, B. and Nazari, M. and Kiomarsi Dehkordi, F. (2017) Diagnosis diabetes on the basis of information extracted from the ECG signal using Artificial Neural Networks. journal of shahrekord university of medical sciences, 19 (4).

This list was generated on Sat Nov 18 01:00:47 2017 IRST.